SATA HDD/SSD PMC Storage Module

System Overview Specifications Technical Drawings

System Overview

PDSi's new SATA PMC Storage Module (PMC-SD18) offers high capacity SATA storage using compact 1.8 inch hard disk or solid state drives providing up to 160GB of storage. The on-board 4 port SATA controller provides an additional 3 drive interfaces through the rear I/O (Pn4) connector.

Whether configured with an economical rotating HDD or highly shock-resistant SSD, this low profile module fits comfortably into VITA 42.3 compatible VME, CompactPCI®, AdvancedTCA®, and other processor boards with a PMC mezzanine card interface. This board meets all PMC height restrictions, especially when configured with a solid state drive.

Military applications will appreciate the high operating stock resistance (1000+ G) and high MTBF (over 1 million hours) when configuring this PMC with the latest solid state drive technology. PDSi will adapt this design for other I/O requirements and can develop compatible rear I/O boards if needed. Extended availability from PDSi is assured. PDSi can also provide integration, extended warranty, global repair and support services.

Specifications

Key Features

High-capacity SATA storage PMC
1.8 inch SATA HDD or SSD
- Low-cost rotating HDD for normal uses
- Rugged SSD for high shock and vibration
3 additional rear SATA channels
Windows and Linux support
PICMG PMC-compliant interface
Extended availability assured
RoHS compliant
Activity LEDs on front bezel
Low-profile, meets PMC height requirements

Controller

4 port LSI SATA controller

HDD device

1.8 inch SATA drive with microSATA electrical interface
- 5400 RPM
- Avg seek time: 15 ms
- 1.5 Gbit/sec transfer rate
- Up to 160 GB capacity
Reliability
- Non recoverable errors: 1 in 1014 bits
- Product life: 5 years or 20,000 power ON hours
Operating Shock
- Shock: 500G / 2.0ms
- Vibration: 2G

SSD device

1.8 inch SATA drive with microSATA electrical interface
- 0.1 ms access time
- Up to 250 MByte/s read
- Up to 160 GB capacity
Reliability
- Built-in wear leveling
- MTBF: 1,000,000+ hours
Operating
- Shock: 1000-1500 G
- Vibration: 16 G

Front Panel

LEDs

4 activity LEDs, I per channel

PMC Interfaces

Pn1, Pn2

32 bit PCI-x bus, 33/66/100/133 MHz

Pn3

64 bit PCI-x bus, 33/66/100/133 MHz

Pn4

3 SATA channels

Signaling

Keyed for 3.3V signaling

Power

5V and 3.3V through PMC connector
Total power –TBD watts

Compliance

IEEE 1386/1386.1 (convection cooled)
ANSI/TIA/EIA-644 (electrical)
RoHS Directive 2002/95/EC

Operating Systems

Linux, Windows

Form Factor/ Dimensions

Single height PMC
74mm x 149mm x 8.2mm

Temperature & Humidity

Operation : 5 to 55 degC
5% - 95% non-condensing

Technical Drawings