Pinnacle Data Systems, Inc.
Home > Products > Custom Design Engagements > Network Appliance 2U

Network Appliance 2U

System Overview    Specifications


System Overview

Network Appliance Front Access AC System, NAFA217 2U Chassis, PDSi Design Short 17" deep, 19" Rackmount.

Front Bezel closes over 1.5” cable cavity for a clean custom front access system.

Motherboard - SuperMicro X6DVL-EG2 Dual Intel 64-bit Xeon with 800MHz FSB support, up to 3.6GHz. Intel E7525 Chipset. Up to 8GB DDRII 400MHz RAM.

Dual GigE Lan ports, Dual Sata Ports, 2 PCI-Express (4X), + 1x64-bit 66MHz, 3 32-bit 33MHz slots. One Full-height, full-length and one full-height and half-length PCI cards OR Four half-height, half-length Optional front accessible PCI cards.

Power supply is Dual Hot Swap 460W AC, rear access.

Encryption, optional using Cavium NITROX or Broadcom SSL accelerators.
Up to two SATA disks.

Unique hinged Front Bezel designs can be created or use the standard 2U Bezel.

One year, return to depot, 15-day turn, standard warranty.

Specifications

Features

  • Dual Intel® 64-bit Xeon™ Support, up to 3.60 GHz, 800 MHz FSB
  • Intel® E7320 (Lindenhurst VS) Chipset
  • Up to 8GB DDR-II 400MHz SDRAM
  • Dual Intel® 82541GI Single-port Gigabit Ethernet Controller
  • 2x SATA Ports via 6300ESB SATA Controller
  • 2x (x4) PCI-Express, 1x 64-bit 66MHz PCI, 3x 32-bit 33MHz PCI
  • ATI RageXL 8MB Graphics

Specifications

On-board Devices

Chipset

  • Intel® E7320 chipset
  • MCH + 6300ESB + 82541GI

SATA

  • 6300ESB (Hance Rapids) SATA
  • Controller (2x Drive support)
  • 2x SATA Ports
  • RAID 0, 1 support

IPMI

  • Support for Intelligent Platform Management Interface v.2.0

Network Controllers

  • Dual Intel® 82541GI
  • Single Port Gigabit Controller
  • Support for 10Base-T, 100Base-TX, 1000BASE-T, and 2x RJ45

Number of Ports

  • Four or More additional 1000Base-TX port configurable with PCI-X expansion.

Graphics

  • ATI Rage XL SVGA PCI video controller with 8 MB of video memory

Super I/O

  • Winbond 83627HF chip

Clock Generator

  • ICS9DB104BFT

I/O Ports

Serial ATA

  • Two Serial ATA ports
  • Two SATA hard drives supported.

IDE

  • Dual EIDE channels support up to four
  • UDMA / IDE devices
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100

Floppy

  • 1 Floppy controller; 1.44 MB support

LAN

  • 2x RJ45 LAN port

USB

  • 2x USB rear ports
  • 1x USB internal header for 2 ports
  • USB 2.0 Compliant / 1.1 Compliant

VGA

  • 1x VGA port

Keyboard / Mouse

  • PS/2 keyboard and mouse ports

Serial Port / Header

  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header

Processor / Cache

CPU

  • Dual 604-pin FC-mPGA4 Sockets
  • Supports up to two Intel® 64-bit Xeon™ processor(s) of the same type below:
    • Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
    • Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
    • Xeon LV (Low Voltage) CPU, up to 2.8 GHz

System Bus

  • 800 MHz system bus

OSS

  • Supports 64-bit Operating Systems
  • Supports 32-bit Operating Systems

Memory

Memory Capacity

  • Four 240-pin DIMM sockets
  • Supports up to 8 GB DDR-II 400MHz memory
  • Dual channel memory bus
  • Memory must be populated in pairs

Memory Type

  • DDRII 400MHz registered ECC buffered
  • SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

  • 2GB, 1GB, 512MB, 256MB

Power

  • ACPI/APM Power Management
  • Wake-On-LAN (WOL) header
  • Power-on mode control for AC power loss recovery

Dimensions (W x H x D)

  • 2U Rackmountable
  • 19 ” x 3.5” x 17”

Temperature

  • Monitoring for CPU and chassis environment
  • CPU thermal trip support

Encryption Accelerator (Optional)

  • Cavium NITROX or Broadcom SSL accelerators.

System Overview    Specifications

*All other products or service names mentioned herein are trademarks of their respective owners. Specifications are subject to change without notice.