Network Appliance 1U
System Overview
Specifications

System Overview
Network Appliance Front Access AC System, NAFA117 1U Chassis, PDSi Design Short 17" deep, 19" Rackmount.
Front Bezel closes over 1.5” cable cavity for a clean custom front access system.
Motherboard - SuperMicro PDSMi, Supports Pentium D, Pentium 4 Ext. E7320 Chipset, 1066/800MHz FSB support. Up to 8GB DDRII 533/667 MHz RAM. Dual Gigabit Lan Ports, Dual Sata Ports, Dual USB, PCI-Express slot + PCI 64bit- 133MHz, 1-slot. One Full Height, half-length PCI card usable in this 1U configuration. Serial port.
Power supply is 460W AC, rear access.
Encryption, optional using Cavium NITROX or Broadcom SSL accelerators.
Unique hinged Front Bezel designs can be created or use the standard 1U Bezel.
One year, return to depot, 15-day turn, standard warranty.
Specifications
Features
- Intel® Pentium® D, Pentium® 4; ExtremeEdition, Pentium 4, Pentium; Extreme Edition & Celeron D in LGA775 Package(FSB 1066/800/533)
- Intel® E7230 (Mukilteo) Chipset
- Up to 8GB unbuffered, ECC DDRII 667/533 SDRAM
- 2x Intel® 82573V (Tekoa) PCI-e Gigabit LAN Port
- Built-in SATA ICH7R Controller; 4x SATA (3 Gbps) Drive with RAID 0, 1, 5, 10 Support
- 1 (x8) PCI-Express or 1x 64-bit 133MHz PCI-X, 1x 32- bit 33MHz PCI
- On board ATI RageXL Graphics
- IPMI 2.0 Support (AOC-IPMI20-E)
Specifications
On-board Devices
Chipset
- Intel E7230 (Mukilteo) Smithfield chipset ICH7R + PXH-V + Intel® 82573V
Serial ATA
- Intel® ICH7R SATA controller built-in RAID 0, 1, 5, 10
IPMI
- 1U support for Intelligent Platform Management Interface v.2.0
Network Controllers
- Dual-port Intel® 82573V Gigabit PCIExpress Ethernet (Tekoa) Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output
Number of Ports
- Four additional 1000Base-TX port configurable with PCI-X expansion.
VGA
- On-board ATI RageXL graphics, 8MB
Super I/O
Clock Generator
I/O Ports
Serial ATA
- Four Serial ATA ports (3 Gbps performance)
- One SATA hard drive supported
IDE
- One EIDE channel supports up to two UDMA IDE devices
- IDE Master / Slave 2 ports
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- White Connector for Compact Flash (CF) card only
Floppy
- 1 Floppy controller; 1.44 MB
LAN
USB
- 6x USB 2.0 compliant / 1.1 compatible
- 4x internal USB headers
- 2x rear ports
VGA
Keyboard / Mouse
- PS/2 keyboard and mouse ports
Serial Ports
- 1x Fast UART 16550 serial port; 1x Header
Parallel Port
- 1x ECP / EEP Parallel Header
Processor
- Single LGA775 ZIF Socket
- Supports an Intel® Pentium® D (Smithfield Dual Core) processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor
- Supports an Intel® Pentium® 4 Extreme Edition processor
- Supports an Intel® Celeron® D processor with 256KB L2 Cache
- Hyper-Threading (HT) capable
- 2MB / 1MB L2 Cache
Memory
Memory Capacity
- Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered,
- ECC DDRII 667/533MHz memory (Dual Channel)
Memory Type
- DDRII 667/533MHz unbuffered,
- ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes
- 256 MB, 512 MB, 1 GB, 2GB
Chipset
- Intel E7230 (Mukilteo) Smithfield chipset
- ICH7R + PXH-V + Intel® 82573V
Power
- ACPI/APM Power Management
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
Dimensions (W x H x D)
- 1U Rackmountable
- 19 ” x1.75” x 17”
Temperature
- Monitoring for CPU and chassis environment
- CPU thermal trip support
Encryption Accelerator (Optional)
- Cavium NITROX or Broadcom SSL accelerators.
System Overview
Specifications
*All other products or service names mentioned herein are trademarks of their respective owners. Specifications are subject to change without notice.