CP2040/2140 cPSB RTM

System Overview Specifications PDF Specifications Sheet

System Overview

PDSi's CP2040/2140 cPSB Rear Transition Module (RTM) brings all of the functionality of the popular PICMG 2.16 Compact Packet Switched Backplane (cPSB) to Sun's powerful Netra™ CP2040 or CP2140 boards, improves performance, and offers a greater degree of flexibility,
scalability and reliability.

Designed in the standard cPCI 6U form factor, the high performance Netra CP2040 and CP2140 boards are powered by the UltraSPARCTM II processor. Essential features of the Netra boards include hot swap and dual Ethernet, dual SCSI for clustered solutions, two USB ports and full Solaris™ 8 support. The CP2040 and CP2140 boards allow communications and network equipment providers to build customized highly available carrier-grade systems.

With literally a "flip of a switch" on PDSi's CP2040/CP2140 cPSB RTM, the customer can change the functionality of the popular Netra boards from their standard cPCI functionality to cPSB, connecting the Ethernet ports to the backplane. The cPSB architecture enables the use of proven TCP/IP based Ethernet networks using an infrastructure that eliminates cabling
and embeds the switching fabric within the system at the board level.

Specifications

The unmatched versatility and flexibility of PDSi's CP2040/CP2140 cPSB RTM gives NEPs and other OEMs the ability to quickly prototype and deliver highly available/scalable hardware. Combining the CP2040/ CP2140 cPSB RTM with any of PDSi cPCI products and expert system integration, design, branding and testing services can produce a complete SKU, utilizing customer specified third party components or Commercial off-the-shelf products to greatly reduce time-tomarket.

Key Differentiators

Full functionality of popular PICMG 2.16 cPSB to Sun Microsystems’ CP2040 or CP2140 processor boards
Easily switches between standard and cPSB configurations
Pin compatible with standard Sun RTM when switched to standard configuration
Standard PICMG 2.1 or PICMG 2.16 on the same card
Telcordia NEBS GR-1089-CORE Level 3 and NEBS GR-63-CORE Level 3 compliant design

Mechanical Specifications

Form Factor: 6U
Length: 233.68 mm (9.2 in.)
Width: 78.74 mm (3.1 in.)
Height: 13.72 mm (0.54 in.)

Power Requirements

Voltage: 5V/3.3V/12V/-12V (maximum 2.5W)

The CP2040/CP2140 cPSB RTM is powered through the CP2040 or CP2140 board.
For more information, see the Netra CP2040 Technical Reference and Installation Manual or the Netra CP2140 Technical Reference and Installation Manual

Operational Modes

Standard: Pin compatible with Sun RTM

cPSB: PIM becomes non-functional

Environmental Specifications

Temperature Range
Operating: 0°C to 55°C
Non-operating: -40°C to 70°C, 5%–95% RH
Relative Humidity: 0%–95% operational, non-condensing
Altitude: 60m below sea level to 4000m above sea level

Regulatory Conformance

FCC
Class A, EMI

Safety
cUL 60950/1950 3rd Edition

Telcordia
GR-1089-Core Level 3
NEBS GR-63-Core Level 3 compliant design

Standards Conformance

PICMG 2.1 cPCI
PICMG 2.16 cPSB
IEEE 802.3
SCSI Parallel Interface-3 Rev.3
I2C Bus Specification Ver. 2.1
EIA/TIA 232
PICMG 2.0 R3.0
VITA 36-199X

For a full list of specifications on Sun's Netra CP2040 or CP2140 boards, please see www.sun.com

Rear Panel Access Interfaces

Ethernet channels A and B via RJ-45 in non-cPSB configuration
SCSI port A and B via dual 68 position SPI-3
USB ports 1 and 2
Serial ports A and B via D-Sub Micro DB9 connector
PMC Interface Module (PIM) I/O

On Board Interfaces

Floppy Port via 40-pin header strip
Parallel port accessible via 26-pin header strip
PS2 Keyboard and Mouse ports via two 4-pin headers
I2C/Reset Header

Note: Utilization of the RTM in cPSB mode precludes use of PIM.