ComputeNode 4U cPSB

System Overview Specifications Rear View & Technical Drawings

System Overview

PDSI's ComputeNode4UTM cPSB (Node4UTM cPSB) is an efficient PICMG 2.16-based carriergrade CompactPCI® (cPCI) solution developed for the embedded control and communications marketplace. This 8-slot cPCI chassis measures only 7" high and may be densely packed into any new design or existing rack. The Compact Packet Switched Backplane (cPSB) architecture embeds the Ethernet switching fabric within the system at the board level.

Configurable with various processors—Sun™, Intel®, PowerPC and custom-designed—Node4U cPSB provides high performance in a compact unit. PDSI’s custom cPSB features one slot for dual 3U Ethernet switches, one system slot and six I/O slots for superior slot density, and a standard 3.5” SCSI hard drive located above the power supplies offers reliable data storage.

PDSI’s unique cPSB design utilizes a single cPCI slot for inclusion of dual fabric Layer 2 10/100Mbps Ethernet switches. Each switch has nine Ethernet ports in a fully nonblocking configuration, and two 10/100Mbps ports available on a Rear Transition Module (RTM) using RJ-45 connectors. With link and activity LEDs each port is capable of autonegotiating to determine its mode of operation. The switches are hot-swappable, and in the HA configuration operation can be maintained at all times for the most demanding applications.

PDSI's Node4U cPSB is also designed with a system alarm card for monitoring and control status. The system alarm card communicates with the system CPU through an I2C Bus Interface or an RS-232 interface. The alarm card is designed to be hot-swappable as a Field Replaceable Unit (FRU) and does not require a cPCI card slot.

Specifications

Node4U cPSB features superior air cooling and front accessible power supplies in a load sharing 2+1 redundant configuration. These hotswappable power supplies are standard with dual DC feed or single AC feed.

As with all PDSi products, Node4U cPSB combines expert Rapid Product Realization design, branding and testing services for a complete SKU utilizing customer-specified third party components or Commercial off-the-shelf products, greatly reducing time-to-market.

Key Differentiators

One slot for dual 3U Ethernet switches, one system slot and 6 I/O slots, all with corresponding RTMs in a custom cPSB chassis
Redundant, hot-swappable, 10/100 Layer 2 switches in one 6U cPCI slot
Three hot-swappable DC or AC power options in 2+1 redundant configuration
Hot-swappable front and rear fan trays for superior cooling and serviceability
Optional High-performance 3.5" hard drive that does not require a cPCI card slot
Alarm card provides fan, power monitoring and status LED without the use of a cPCI slot
Telcordia NEBS GR-1089-CORE Level 3 and GR-63-CORE Level 3 tested & certified design
Customizable options available
High performance cooling with redundant Quad 66 CFM fans in the front tray, Dual in rear

Mechanical Specifications

Height: 4U (178 mm/7 in.)
Width: 436 mm (17.2 in.)
Depth: 318 mm (12.5 in.)

Enclosure
19 in. rackmount (EIA & telco rack support) and custom (23 in.) requirements

Mounting Points
Front support mounting brackets and custom requirements

System Module Configuration

Eight 6U cPCI slots, with corresponding RTMs
- 1 system slot; 6 I/O slots
- 1 dual redundant 3U Ethernet switch slot (see 3U cPSB 8+2G Ethernet Switch for datasheet details)
Standard H.110 backplane; non H.110 optional

System Cooling

Left to right airflow
6 hot-swap fans providing 356 CFM
Quad Front and Dual rear Fan Trays

Media Options

Standard

3.5” SCSI HD in 3U, 8hp above power supply

Optional

Compact Media Carrier 2.5” SCSI HD w/PMC
2-slot cPCI 3.5” SCSI HD carrier
Custom media configurations available
RTM Available with standard SCSI I/O RTM

Alarm Card Specifications

Standard:

Dry Relay Contact Outputs: Two dry contacts, NO/NC
Power Output Monitoring Monitors: +3.3V, +5V, +12V, -12V
Power Input Monitoring: Two digital inputs
Power Supply Fail Signal: Signal power fail condition event
Status LED: Tri-color LED on rear panel to signal status
Fan Monitoring: Monitors three digital inputs for the status of each system fan
Interfaces: I2C device interface and external Serial/TTY
Hot-swappable
Out-of-bandwidth management

Optional: Alert!Node

Power Options

AC single feed
Dual DC feed with rear ON/OFF switch for each feed
2+1 Redundant Configuration
Hot-swappable, 3U, 8 hp power supplies

DC Power: 250W standard on RoHS units
DC Input: Rear terminal block -36/-72 VDC
AC Power: 200W*/supply
AC Input: 115/230 VAC, 60/50Hz
Optional AC/DC: 200W/supply
Voltage Outputs: +5V@25A, +3.3V@25A, +12V@5A, -12V@1A (based on single 200W power supply)

Regulatory

Certification-Standard
FCC Class A (AC/DC)
cUL 60950 3rd Edition

Certification-Optional
NEBS, ETSI, CE, TUV, VCI, CSA and others

Environmental Specifications

Temperature Range
Operating: 0°C to 55°C
Storage: -40°C to 70°C

Flammability Rating
UL94-V0

Customizable Options

Backplanes
Power supplies
Alarm card—Providing input and output voltage, fan and interface monitoring
System integration
Product branding and labeling

Warranty & Service

Standard Warranty
One year parts and labor, return to factory

Service Plans
All permutations of 7x24, 5x24, 5x9, or next day; on-site or phone

Rear View & Technical Drawings

Key

Alarm card
Rear hot-swap fan tray
Configurable rackmount ears
System slot RTM
Six each RTM slots
cPSB Ethernet switches RTM
Frame ground lug
Dual DC input feeds
Dual DC ON/OFF switches
AC ON/OFF switch
AC input feed