ComputeNode 4U cPSB Dual 6U Switch

Specifications

With its horizontal design and superior air cooling functionality, the Node4U is a cost-effective product providing the highest levels of quality and manageability in mission-critical applications. Available with dual DC feed or single AC input, the Node4U is powered by 3 front-accessible hot-swappable power supplies in a load-sharing 2+1 redundant configuration.

As with all PDSI products, the Node4U cPSB Dual 6U Switch combines expert Rapid Product Realization design, branding and testing services for a complete OEM product solution using customer-specified third-party components or commercial off-the-shelf products, greatly reducing time to market.

Key Differentiators

• 2 slots for 6U Ethernet switches, one system slot, and 5 I/O slots, all with corresponding RTMs in a 4U cPSB chassis
• Redundant hot-swappable PICMG 2.16 10/100/1000 Ethernet switches
• Enhanced Alert!Node provides out-of-band monitoring and control
• Remote individual cPCI slot power-on reset capability provided by the Enhanced Alert!Node alarm card
• Three hot-swappable power supplies in 2+1 redundant configuration
• Hot-swappable front and rear fan trays with sidemount air filter for superior cooling and serviceability
• Design compliant to Telcordia NEBS Level 3, GR-63 CORE & GR-1089 CORE
• High performance cooling with redundant Quad 66 CFM fans in the front tray, Dual in rear

Mechanical Specifications

Height: 4U (178 mm/7.0 in.)
Width: 436 mm (17.2 in.)
Depth: 318 mm (12.5 in.)
Weight: 25 lbs in its base configuration

Enclosure
19 in. EIA rackmount and custom requirements

Mounting Points
Mounting brackets for front support.
Custom options available.

System Module Configuration

• Eight 6U cPCI slots, with corresponding RTMs
• 2 slots for 6U Ethernet switches
• 1 system slot
• 5 I/O slots

Ethernet Switch Options

Fabric slots keyed for use with PICMG 2.16 “Extended” 10/100/1000 Ethernet switches (20+ ports each, consult factory for alternate configurations)

System Cooling

• Left to right airflow
• 6 hot-swap fans providing 356 CFM
• Quad Front and Dual rear Fan Trays

Media Options

3.5” SCSI Wide or IDE HD in 3U, 8HP carrier above power supplies

Enhanced Alert!Node Specifications

• System Monitoring Input feed detection
• CompactPCI® voltage monitoring
• Power supply monitoring and control
• cPCI slot monitoring and control with individual slot remote reset capability
• Fan detection
• Temperature sensor
• Hard drive presence detection
• IPMI-compliant device monitoring and control
• PICMG 2.9-compliant
• User-configurable event control
• Dry Contacts 3 SPDT, NO/NC via µDB-9
• LEDs Critical/Major/Minor alarms
• Booting, Shutdown
• Dark office configurable
• Interfaces 10BaseT Ethernet (RJ-45) and RS-232 serial (µDB-9)
• Protocol Support IPMI v 1.5, Telnet, TFTP, DHCP
• Hot-swappable
• Out-of-bandwidth management

For more information, see the Enhanced Alert!Node product page.

PICMG™ Compliance

All slots compliant to PICMG 2.0 R3.0, 2.9, 2.16
System slot and I/O slots also compliant to PICMG 2.5

Power Options

• 3 hot-swappable 3U 8 HP power supplies
• 2+1 redundant configuration
• Dual DC feed input or single AC feed

Standard: 250W/supply
Optional: 200W/supply
DC Input: Rear terminal block –36/–72 VDC
AC Input: 90 to 264 VAC PFC (Power Factor Corrected)

Regulatory

Certification-Standard
FCC Class A , UL60950

Certification-Optional
NEBS, ETSI, CE, TUV, VCCI, CSA & others

Environmental Specifications

Temperature Range
Operating (recommended): 20oC to 40oC (below 1800m)
Operating (short-term): –5oC to 55oC (below 1800m)
Storage: –40oC to 70oC

Flammability Rating
UL94-V0

Customizable Options

• Backplanes
• Power supplies
• Alarm card—Providing input and output voltage, fan and interface monitoring
• System integration
• Product branding and labeling

Warranty & Service

Standard Warranty
One year parts and labor, return to PDSi

Service Plans
All permutations of: 7x24, 5x24, 5x9, or next day; on-site and/or phone